Automotive Technology banner image Automotive Technology banner image Automotive Technology banner image

Automotive Technology


Start Date: September


Location: Summerside Waterfront Campus


Length: 2 Years


Credential: Diploma, Automotive Technician


Program Availability: Fall 2024 Term

Canadian Applicants: Waiting list

International Applicants with a Valid Study Permit: Waiting list

Other International Applicants: Closed


The Automotive Technology program provides a comprehensive introduction to the mechanical and technological skills you’ll need to work as an automotive service technician. The program gives you a solid grounding in mechanical systems, computers, networks, electronics, and non-mechanical systems you’ll encounter on the job. You will take what you learn in the classroom and apply it in Holland College’s on-campus Automotive Technology shop, and on-the-job training will give you the opportunity to apply your skills in the workplace.

This program is located at our Summerside Waterfront Campus. Take a virtual tour.

ON-THE-JOB TRAINING


You’ll work on a fleet of diverse vehicles to develop your skills, then you will have an on-the-job training work placement where you will be in a real work environment. On-the-job training not only gives you valuable real-life experience, it also helps you build a network of potential employers.

Program Learning Outcomes


Upon successful completion of the Automotive Technology program at Holland College, graduates will:

  1. Work safely and in accordance with applicable acts, regulations, and legislation to ensure personal and public safety.
  2. Disassemble and assemble components to required specifications by applying workshop skills and knowledge of basic shop practices.
  3. Diagnose and repair various automotive system problems by using troubleshooting techniques and test equipment and by applying fundamental knowledge of motor vehicle operation, components, and their interrelationships.
  4. Adjust, repair or replace parts and components of automotive systems including fuel system, brakes, and steering and suspension systems using hand tools and other specialized automotive repair equipment.
  5. Adjust, repair or replace parts and components of automotive systems including engine and drive train, emission control and exhaust, cooling and climate control, and electrical and electronic systems using hand tools and other specialized automotive repair equipment.
  6. Demonstrate verbal and written communication skills to effectively advise customers on work performed, general vehicle condition and future repair requirements.
  7. Use technology and computer skills to support work in the automotive service and repair environment.
  8. Identify strategies for ongoing personal and professional development, that will lead to enhanced work performance and career opportunities and keep pace with industry changes.

RED SEAL


The Red Seal gives you the ability to work anywhere in Canada without further testing or certification. The Red Seal is recognized as the Interprovincial standard of excellence for your chosen trade and is the designation most employers will ask for.

The most successful path to a Red Seal as an Automotive Service Technician begins with Holland College’s Automotive Technology program. You earn 30 hours of apprenticeship time for each week of training hours and write two block exams, which puts you well on your way to Red Seal certification. Once you are working with a suitable employer, you can register as an apprentice, and Apprenticeship PEI will give you credit for the hours earned and block exams passed while you were in Holland College’s Automotive Technology program.

DEGREE PATHWAYS


This program has degree pathways, giving you the opportunity to receive credit for your Holland College diploma when you continue your education. For a complete list of agreements, visit the Degree Pathways page.

Partner Institution Credential Details of Agreement
University of New Brunswick - Saint John, Saint John, N.B. Bachelor of Applied Management Graduates with a 70% average are granted two years of credit toward a Bachelor of Applied Management degree.
  • Grade 12 or equivalent with credits at or above the general level
  • A valid Class 5 (cars and light trucks) driver’s license
  • Résumé including work and volunteer experience with applicable dates, membership in groups, associations or athletics, awards and distinctions, and any other information about yourself relevant to the program

Notes:

  • Don’t have the courses you need to get into this program? Upgrade, earn high school credits, or get your GED in Adult Ed. It’s free!
  • A driver's abstract is not required for the program but may be a condition of employment in this industry. Applicants should consider whether their driver's abstract would negatively affect their employment opportunities.
  • Preference will be given to applicants with Grade 11 or 12 academic English, math and physics.
  • If your first language is not English, please review our English Language Requirements page.

2023/2024 Academic Year

Tuition, fees, and other costs are listed in Canadian dollars. International tuition includes the International Student Fee.

1st Year

Canadian

International

Tuition  $5,917 $11,017
Fees $857 $1,607
Other Costs $2,150 $2,150
Total $8,924 $14,774

2nd Year

Canadian

International

Tuition $5,917 $10,917
Fees $837 $1,587
Other Costs $460 $460
Total $7,214 $12,964
/

Canadian Cost Breakdown

Tuition & Fees

 1st Year

 2nd Year

Tuition $5,917 $5,917
Student Union $172 $172
Lab Fee $120 $120
Health Insurance Fee $445 $445
First Aid/WHMIS $120
Graduation fee $100
   Total payable to Holland College $6,774 $6,754
     
1st installment due first day of first semester $4,359 $4,339
2nd installment due first day of second semester $2,415 $2,415
     

Other Costs
Please note: the cost of books, materials, and supplies are included here for your information only, this amount is not payable to the college. Do not include this amount in your tuition payment.

 1st Year

 2nd Year

Books $600 $100
Materials/Supplies $50 $50
Uniforms/Safety Shoes/License Fee $200 $160
Equipment/Tools/Registration Fee $1,300* $150
    Total $2,150 $460
     
Grand Total $8,924 $7,214

*When they finish their first year, students will begin work placements. At this time, students will be required to purchase a set of tools. Average cost is $1,300; but will vary depending on tool quality and existing personal tool supply. A list will be provided by the instructor.

International Cost Breakdown

Tuition & Fees

1st Year

2nd Year

Tuition* $11,017 $10,917
Student Union $172 $172
Lab Fee $120 $120
Health Insurance Fee $1,195 $1,195
First Aid/WHMIS $120
Graduation fee $100
     Total payable to Holland College $12,624 $12,504
     
1st installment due first day of first semester $10,209 $10,089
2nd installment due first day of second semester $2,415 $2,415
     

Other Costs
Please note: the cost of books, materials, and supplies are included here for your information only, this amount is not payable to the college. Do not include this amount in your tuition payment.

 1st Year

 2nd Year

Books $600 $100
Materials/Supplies $50 $50
Uniforms/Safety Shoes/License Fee $200 $160
Equipment/Tools/Registration Fee $1,300** $150
     Total $2,150 $460
     
Grand Total $14,774 $12,964

*International tuition includes the International Student Fee.

**When they finish their first year, students will begin work placements. At this time, students will be required to purchase a set of tools. Average cost is $1,300; but will vary depending on tool quality and existing personal tool supply. A list will be provided by the instructor.

  • Car dealerships
  • Independent garages
  • National auto chains
  • Service centres
  • Fleet maintenance
  • Customer service
  • Self-employment

APPRENTICESHIP

After you graduate from Holland College, your apprenticeship training begins. When you register with your provincial apprenticeship program, you will receive credit for the hours earned and level exams passed while you were at Holland College. Learn more about apprenticeship and the Red Seal program.

DEGREE PATHWAYS

Many Holland College programs have degree pathway agreements with other post-secondary institutions. You can receive credit for your Holland College diploma toward a university degree or other post-graduate credential, saving you time and money! Find out more on the Degree Pathways page.

Course Code

Course Name & Description

Credit Values


Course Code:SAFE-1005

PEI Occupational Health and Safety

An overview of the Occupational Health and Safety Act of Prince Edward Island. Students examine the legislation, how PEI employees are protected while on the job and the responsibilities of employees and employers.

Credit Value:0


Course Code:AUTO-1000

Safety, Tools and Equipment

An introduction to the tools and equipment used by an Automotive Service Technician. Safe and efficient work habits, selection and maintenance of tools and equipment are practiced.

Credit Value:2


Course Code:AUTO-1005

Maintenance and Service

A thorough introduction to customer service, work orders, and professional demeanor as an Automotive Service Technician. Students explore and practice these skills while performing Motor Vehicle Inspections (MVI). Pre-Delivery Inspections (PDI) and preventative maintenance tasks. Students are also introduced to issues relating to body components and trim.

Credit Value:3


Course Code:AUTO-1100

Braking Systems

This course prepares students to diagnose and repair mechanical braking systems including disc, drum, and hydraulic brakes. Student use measuring tools and procedures to ensure that components meet safety requirements and apply safety best practices while servicing brake components and systems.

Credit Value:3


Course Code:AUTO-1115

Suspension, Steering, and Wheel Alignment

In this course students learn to analyze and service front and rear suspension systems, as well as inspect and repair tires, wheels, and wheel bearings. Students also learn to inspect and repair manual and power steering gears and steering columns, as well as how to perform two- and four-wheel alignments.

Credit Value:5


Course Code:AUTO-1210

Basic Electrical and Introduction to Scan Tools

In this course students learn the fundamentals of electricity in relation to automotive vehicles. In addition, students are introduced to basic scan tools used for diagnosing issues with automotive computer systems.

Credit Value:3


Course Code:AUTO-1221

Drivelines

Course Description: In this course students learn to diagnose, service and repair drivelines and axles. The training environment includes lectures, self-study and practical exercises.

Credit Value:2


Course Code:AUTO-1225

Engine Fundamentals

This course is designed to provide students with an overview of the various types of engine assemblies, their components, as well as how they operate. Students learn to apply formulas used to calculate engine displacement, compression ratios, and horsepower.

Credit Value:2


Course Code:AUTO-2100

Advanced Electrical

This course is designed to further build on the skills taught in the Basic Electrical course, to teach students how Voltage, Amperage and Resistance can affect many electrical circuits. This course will also cover how to apply an automotive wiring diagram to the diagnostic approach to solve electrical faults. In addition, students learn how to properly set up and use advanced electrical diagnostic tools, such as Oscilloscopes.

Credit Value:3


Course Code:AUTO-2110

Vehicle Convenience Systems

In this course students learn about vehicle convenience systems. Topics include; body control modules, lighting, entertainment systems, anti-theft systems, as well as other instruments and safety devices found in automobiles. Students are shown how to diagnose and repair vehicle convenience systems.

Credit Value:4


Course Code:AUTO-2115

Vehicle Computer Systems

Students learn about the function of vehicle electronic and computer systems, as well as how to diagnose, repair, and test these systems.

Credit Value:2


Course Code:AUTO-2120

Ignition Systems

This course prepares students to work with ignition systems. Students learn about the function of manual and electric ignition systems, and how to conduct tests to diagnose problems, and service these systems based on their findings.

Credit Value:2


Course Code:AUTO-2130

Fuel Delivery Systems and Drivability

This course prepares students to service and repair different types of fuel delivery systems. Students learn about engine drivablility and performance and use scan tools and DVOM's to verify engine sensor data, and repair performance issues.

Credit Value:5


Course Code:AUTO-2135

Vehcile Safety Systems

This course explores the various safety systems found in today's vehicles. Students learn to service and repair Electronic Brake Control (EBC) systems, as well as how to diagnose and repair occupant restraint systems. Students also investige different types vehicle driver assistance control systems designed to increase safety.

Credit Value:2


Course Code:AUTO-2150

Air Conditioning and Climate Control

In this course students learn about automotive heating and cooling systems, and how to diagnose and repair those systems. Students are also required to complete the requirements for Ozone Depletion Substance handling.

Credit Value:2


Course Code:AUTO-2200

Starters and Alternators

In this course students learn about aspects of the engine's electrical system inlcuding how to test electrical charging systems, as well as inspect and service generators and starting systems.

Credit Value:2


Course Code:AUTO-2205

Differentials

Students learn about the operating principles of differential assemblies as well as methods to diagnose and repair these systems according to manufacturer's specifications.

Credit Value:2


Course Code:AUTO-2222

Transmissions and Transfer Cases

Students learn how to diagnose and repair manual transmissions systems and are introduced to automatic transmission operation, maintenance and service procedures. Students also learn about the function and operation of transfer cases, as well as procedures used to diagnose, service, remove and install them.

Credit Value:5


Course Code:AUTO-2225

Cylinder Heads

This course prepares students to service and repair engine cylinder heads and associated components such as valves, valve springs, and camshafts. This course also teaches students the importance of automotive cooling systems in relation to regulating an engines temperature.

Credit Value:4


Course Code:AUTO-2230

Cylinder Blocks

This course prepares students to service and repair engine cylinder blocks and its associated components such as crankshafts, pistons, connecting rods and oil delivery system. In addition students will learn engine diagnostic approaches to diagnose engine failures. This course also reviews the basic working principles of a 4 cycle internal combustion engine.

Credit Value:4


Course Code:COMM-1005

Workplace Communications

This course is designed to allow students to develop preparatory skills for securing and retaining employment including; workplace communication, time management, critical thinking and problem-solving, and customer service. Upon successful completion of this course students are able to use oral communications techniques, and create a variety of written documents and reports used in the workplace. Methods and strategies for job search, preparation and retention are also incorporated.

Credit Value:3


Course Code:COMP-1000

Computer Essentials

Students learn productivity software and explore digital environments with practical applications for various workplaces and educational institutions. The main areas of focus include word processing, spreadsheets, presentation software, email and other electronic communication tools, various digital environments, and industry-specific applications.

Credit Value:3


Course Code:MATH-1005

Math Essentials

This course is designed to provide students with a review of fundamental trade related math skills. Students acquire competency in the math skills as they relate to their chosen trade program and future career. Emphasis is placed on developing problem solving and critical thinking skills. Students are challenged to continually make connections between math and their trade, as well as every day applications.

Credit Value:2


Course Code:MATH-1115

Automotive Trade Math

This course is designed to enable the student to develop trade related math skills. Students acquire competency in math skills as they relate to motive power programs and their future career. Emphasis is placed on developing problem solving and critical thinking skills. Students are challenged to continually make connections between math and the motive power field, as well as every day applications.

Credit Value:2


Course Code:NCPR-1001

Standard First Aid and CPR/AED Level C

A comprehensive two-day course offering standard first aid and cardiopulmonary resuscitation (CPR) skills from a certified trainer. As required by regulation, this course covers CPR and the management of other breathing, airway and circulation emergencies, as well as, the control of bleeding, treating shock, stabilizing fractures and dislocations, head and spine injuries, and more. Also, includes automated external defibrilators (AED). This certification expires in 3 years.

Credit Value:0


Course Code:NCPR-1002

Workplace Hazardous Materials Information Systems

Students complete Workplace Hazardous Materials Information System (WHMIS) training and certification.

Credit Value:0


Course Code:NCPR-2010

Refrigerant Handlers Course

This environmental awareness training program, based on Environment Canada's "Code of Practice for Elimination of Fluorocarbon Emissions in Refrigeration and Air Conditioning Systems", deals with environmentally-correct equipment design, proper handling of refrigerants, and prepares participants for complying with Federal and Provincial Regulations covering refrigeration and air conditioning systems. Specific topics covered are: Science of ozone depletion, leak detection methods, system charging procedures, special maintenance provisions, and refrigerant recovery, reuse, recycle and reclamation equipment.

Credit Value:0


Course Code:PRAC-1150

Automotive Service Technology Practicum I

Working in an automotive service shop, students gain industry experience and apply skills and knowledge gained during the preceding courses.

Credit Value:3


Course Code:PRAC-1250

Automotive Service Technology Practicum II

Students gain industry experience and apply skills and knowledge gained during the preceding courses.

Credit Value:3


Course Code:PRAC-2250

Automotive Service Technology Practicum III

Students gain industry experience and apply skills and knowledge gained during the preceding courses.

Credit Value:3


Course Code:WELD-1200

Basic Automotive Welding and Cutting

An introduction to basic welding and cutting operations used in the automotive trade with a focus on oxyacetalyne cutting, welding and brazing and Gas Metal Arc Welding.

Credit Value:1


Automotive Technology background image Automotive Technology background image Automotive Technology background image

The instructors have a lot of experience and design their syllabus really well. The program gradually gets you comfortable with the automotive industry, vehicle repair, and diagnostics. I would recommend this program to anyone who is the slightest bit interested in automotive. My experience was an excellent one! I learned a lot and I’m grateful for the teachers I had and the friendships I made along my two-year journey.

Anthony, Class of 2021

Related
Programs


Aircraft Turbine Technician

Aircraft turbine technicians inspect aircraft engines, troubleshoot issues with mechanical systems, and modify, repair, and test turbine engines. Learn the techniques, procedures, and documentation requirements you need to work in this growing industry in this one-year program.

Precision Machinist

In the one-year Precision Machinist program, you will learn how to take a mechanical blueprint and physically produce the part it describes. Learn to operate lathes, drill presses, vices, micrometers, and milling machines to create the precise component required by technical drawings.

Electromechanical Technology

Learn how to install, maintain, troubleshoot and repair complex automated equipment in this 2-year diploma program. Learn about hydraulic/pneumatic systems, programmable logic controllers, electronics, microprocessors and more.

Additional
Resources